What Kind of Soldering Iron – 30w or 60w?

One of the most common things we get asked is whether to use a 30w or 60w soldering iron. The two are not that different, but the 30w difference between them definitely makes for a substantial difference in terms of power and temperature control, among other things.

You have to make sure that you have the correct one before you start heating things up or you run the risk of damaging any fragile parts and components that you might encounter during the process.

Today, we are going to take a look at the differences between the different wattages of varying models of soldering irons. There are a lot of things to read about so sit back, relax and absorb everything that you read on this article so you know exactly what you are dealing with the next time you see the wattage of a soldering iron being displayed on a sticker.

Why is the wattage important?

The wattage of a soldering iron is incredibly important because you will know just how sufficient the heat will be depending on the wattage they have. This is vital when it comes to using them on different materials and situations such as circuit boards.

You do not want something that has too high of a wattage since you do not want to burn any important components to a crisp. At the same time, you should not get a soldering iron with a low wattage since it might be inconsistent when it comes to the heat.

How does wattage affect soldering irons?

A soldering iron’s wattage gives an indication of how fast it gets hot. Although this will not be the case all the time thanks to the different factors such as the weather, you have to keep in mind that they are more than just numbers on a sticker.

There is a reason why a 30w soldering iron is preferred for most modest electronics while a 60w soldering iron is usually reserved for much bigger and tougher things.

How do I decide between the different wattages?

Basic knowledge of the appliances that you are going to deal with will help you when it comes to choosing the right soldering iron to use with them. For small appliances, it is most likely better to grab a 30w soldering iron and use it to heat up the different components of the equipment.

For medium-sized or exponentially wider appliances, you should be looking to have a 60w soldering iron with you. The difference in sizes of the materials you deal with should be addressed by the difference in wattage, temperature control and precision based on the soldering iron that you are going to be using.

I damaged an item, should I go for a lower wattage?

It highly depends on the item that you broke. Was it too small or too fragile for a 30w soldering iron? If so, you should probably consider using a 15w next time. Those are the most trustworthy soldering irons that you can use when it comes to dealing with rather small appliances.

I need higher wattage, which kit should I get?

One of the best kits that is out on the market right now is the Vastar Full Set 60W Soldering Iron Kit. It includes almost all of the things that are required to have a modest setup.

It is incredibly portable, has an adjustable temperature, five different tips, a desoldering pump, a stand and lots of other bonus extras. You cannot go wrong with that kit, which is why we always suggest it to our readers.

Reply